General Purpose Pressure Regulators
The General purpose BVR-Series pressure reducing regulators offer consistent and reliable pressure control. The BVR can be manually adjusted to specific output pressures based on the internal spring and the force that spring creates. A maximum inlet pressure of 300 PSI (21 Bar) can be reduced to various pressure ranges. This general purpose pressure regulator is made from zinc and/or aluminum with a brass valve and nylon valve cap.
 BVR02N1/4" | 0-175 PSI |
|---|
 BVR03N3/8" | 0-175 PSI |
 BVR04N1/2" | 0-175 PSI |
 BVR06N3/4" | 0-150 PSI |
 BVR08N1" | 0-150 PSI |
 BVR10N1-1/4" | 0-150 PSI |
 BVR12N1-1/2" | 0-150 PSI |
SPECIFICATIONS
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Zinc (1/4" to 1/2"), Aluminum (3/4" to 1-1/2")
Dome: Aluminum
Fluid Media: Compressed Air
Inlet Pressure: 300 PSIG (21 Bar) maximum
Knob: Acetal
Outlet Pressure: See Table A in data sheet
Pressure Adjustment Locking Key: Removable
Pressure Gauge: 0 to 200 PSIG (14 Bar); 1/4" NPT gauge ports
Panel Mounting: 2-1/16" (52mm) hole required
Seals: Nitrile
Valve: Brass (1/4" to 1/2"), Aluminum (3/4" to 1-1/2")
Valve Cap: Nylon
DOWNLOADS